|
A typical gallon of waste oil contains 163,000 to
240,000 BTU per gallon, which can be more than TWO TIMES the energy
potential per gallon of LP gas.
LP gas has a potential for 92,000 BTU per gallon.
 |
A by product of making biodiesel is glycerine. Up to now many
people have struggled with exactly how to deal with the glycerine.
Not any more. The AnzacFuelTech range of waste oil burners solve this
problem. Ranging in heat output from 199,000 BTU to and incredible
775,000 BTU these burners emits little odour and NO smoke.
Dispose of glycerine safely and effectively.
This is because the various proprietary components of our burner work in
concert to achieve a CLEAN burn. Our waste oil burner meets or exceeds
all EPA requirements for such appliances or devices. You may need
to mix approx. 10-12% biodiesel with the glycerine (this depends on the
quality of the glycerine).
The model WOB200 Waste Oil Boiler will heat 7500
square feet with a fuel flow rate of 5.3 LITRES per hour.
The hot water output of 15.0 LITRES per minute at 110C offers
outstanding performance for most uses. The AnzacFuelTech
waste oil burner insures low maintenance, high efficiency
operation, and clean burning performance. A full suite of
pressure and temperature gauges makes monitoring the waste oil
boiler simple, and a re-usable oil filter reduces costs of
operation.
|
 |
| BTU Input |
199,000 BTU |
| Square Foot Coverage |
7,500 square feet |
| Fuel Flow Rate |
5.3 litres / 1.4 gal/hr |
| Max Water Output Temperature |
230F / 110c |
| Max Operating Pressure |
45 PSI |
| Optional Domestic Hot Water Output |
15 litres / 4.0 gal/min |
| Boiler Capacity |
130 litre / 35 gall. system |
| Dimensions |
45" H x 32" W x 56" D |
| Exhaust Diameter |
8 " |
| Electric Requirements |
115AC, 60Hz, 20 amps
240v , 50Hz, 20amps |
| Shipping Weight |
290kg / 650 lbs |
| Compressed Air Requirements |
3CFM @ 40 PSI minimum |
|
|
The AnzacFuelTech burner is powerful and
impressive. A soft start tank which enriches the fuel to
air mixture for immediate start-up with higher air pressure and
purges the residual oil out of the system preventing nozzle
dripping and electrode coking on the waste oil heater. The
special "soft start" tank enriches the fuel to air mixture for
immediate start-up with higher air pressure, purging the
residual waste oil out of the system.
This prevents nozzle dripping and electrode coking, two of the
main causes of boiler failure. The unique retention head, designed
for waste oil Large twin heating elements prevents waste oil
overheating - the major cause of pre-heater sludge and plugging. |
| |
The AnzacFuelTech range of waste oil burners are
unique in their power and performance. They burn cleanly
and efficiently. BUT they don't just burn glycerol, they
burn any waste oil*. Waste oil can quite literally be oil
that is drained from a vehicle during an oil change.
Waste oils can also be used transmission oils, cooking and
vegetable oils, hydraulic oils, combustible synthetic oils or
any oils up to 50 S.A.E. With the flip of a switch the
AnzacFuelTech waste oil burner will also safely burn kerosene and
diesel/biodiesel fuel oils.
So now you know. Glycerine doesn't have to be a chore.
It can be a major source of revenue or costs savings. Use
the heat generated to heat your vegetable oil, or offices, or
warehouse. OR simply sell it to other people so that they
can heat their own premises.
* = Legislation may vary in different countries |
| |
|
